PJM - 2011 PJM General Information

E-mail This Page

Please wait... loading

2011 PJM General Information

2012 | 2011 | 2010

Sent: Wednesday 12.28.2011 10:08 a.m.
Subject: FEB 2012 Auction (FTR) Dates

The Bidding Period for the PJM FEB 2012 Auction will open on Tuesday January 10, 2012 (0:00) and will close on Thursday January 12, 2012 (17:00).

The results will be posted by Friday January 20, 2012 (17:00).

All FTR Auctions are financially binding.

The FTR Monthly Auction can be accessed using eFTR and entering bids into the "FEB 2012 Auction" market.

Valid bidding periods for the "FEB 2012 Auction" are FEB, MAR, APR and Q4.

Please remember to include the period in all submittals.

Valid bidding nodes are located at http://www.pjm.com/markets-and-operations/ftr/auction-user-info.aspx under the Monthly FTR Auctions section.

Sent: Wednesday, 12.14.2011 2:48 p.m.
Subject: LMP Network Model Update planned for December 16 2011

Sent on behalf of Jason Bilash:

The new network model build is tentatively planned for December 16, 2011. The changes can be seen on the following link:

http://www.pjm.com/markets-and-operations/energy/lmp-model-info/bus-model-updates.aspx

If there are any questions, please call PJM Member Relations at 610-666-8980 or send an email to markets_hotline@pjm.com

Sent: Tuesday, 12.13.2011 3:48 p.m.
Subject: The following PJM Manual has been revised and posted to the PJM Web site.

The following PJM Manual has been revised and posted to the PJM Web site.

Manual 13: Emergency Operations

Revision 46 (11/16/2011):

Correction to Exhibit 3 in Section 4.1, to include missing Imminent Threat Level information.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m13.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m13-redline.ashx

Adam Keech (keecha@pjm.com) is the contact for this manual.

Sent: Thursday, 12.07.2011 3:05 p.m.
Subject: The following PJM Manual has been revised and posted to the PJM Web site.

The following PJM Manual has been revised and posted to the PJM Web site.

Manual 34: PJM Stakeholder Process
Revision 1 (09/22/2011):

This revision implements Governance Assessment Special Team Phase IIB recommendations:

Section 5.2 – Inserted new section 5.2 on Senior Standing Committees and renumbered remainder of section 5.
Section 6.4.3 – Added new section on Difficult Issues.
Section 7.2.4 – Added new section related to evaluation of the implementation of the proposed solutions.
Section 15.2 – Revised to implement the Enhanced Liaison Committee.
Section 15.4 – Revised to address timing of ex parte letters.
Appendix IV – Added section on polling approaches.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m34.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m34-redline.ashx

David Anders (andersd@pjm.com) is the contact for this manual.

Sent: Friday, 12.02.2011 3:27 p.m.
Subject: The following PJM Manuals have been revised and posted to the PJM Web site

Manual 19: Load Forecasting and Analysis
Revision 18 (11/16/2011)

Section 3: Revisions reflect adoption of Itron, Inc recommendations regarding the economic driver used in the load forecast model. References to the now-defunct Interruptible Load for Reliability option of Load Management were removed.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m19.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m19-redline.ashx

Manual 22 - Generator Resource Performance Indices
Revision 16 (11/16/2011)

General cleanup and checking the compatibility of all acronyms and definitions between PJM Manuals.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m22.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m22-redline.ashx

Thomas A. Falin (falint@pjm.com) is the contact for these manuals.

Manual 03: Transmission Operations
Revision 39 (11/16/2011):

Section 1.3 – Changed to notify PJM within 15 minutes when TO analysis package is unavailable.
Section 2.1.1 – Included language to clarify use of LTE and STE ratings consistent with M-3A, section 3.3.
Section 2.1.3 – Modified Exhibit 1 to replace LTE/STE with Emergency Rating, modified Note 2 to describe use of STE by exception and eliminated Note 3.
Section 3.3.3 – Modify language to better align with M14D.
Section 3.9 – Added entries for DEOK for upcoming integration, effective 1/1/2012 with in Exhibit 5: Bus and Zone Specific Variations to PJM Base Line Voltage Limits to appropriate voltage limits.
Section 5 – Updated PJM/NYISO PAR Operation section. Also eliminated Attachment A dealing with Waldwick area ratings.
Section 5 – Removed Operating Procedure for Controlling the Doubs 500/230 kV Transformer Loadings for the Allegheny Power Transmission Zone and applicable index tables.
Section 5 – Added DEOK Transmission Zone section within the Operating Procedures with an Effective Date of the PJM-DEOK Integration, 1/1/2012. Added to all applicable index tables.
Section 5 – Added Dimmick-Port Union, Red Bank and Todd Hunter Switching, and Breaker Derate Table within the Operating Procedures for the DEOK Transmission Zone and applicable index tables.
Section 5 – Revised the Common Trench Cable Ratings within the Operating Procedures for the DLCO Transmission Zone.
Section 5 – Delete the Seneca Generation For FE/PJM Constraints section within the Operating Procedures for the First Energy Transmission Zone, due to ATSI integration.
Section 5 – Homer City Stability Limits – Changed Homer City #1 and #2 Transformer references to Homer City North Auto and South Auto Transformer, respectively.
Section 5 – Revised North Anna nuclear station voltage limits in Nuclear Voltage Limits table to appropriate voltage limits under Voltage Control at Nuclear Station section.
Section 5 – Added Brandon Shores – Riverside SPS [SPS] for the BC Transmission Zone
Section 5 – Updated to classify different temperature settings as part of the overall SPS at Carolina line 22 and 54 within the Operating Procedures for the DVP Transmission Zone.
Section 5 – Revised the Common Trench Cable Ratings within the Operating Procedures for the PEPCO Transmission Zone.
Section 5 – Powerton/Joliet Trip Scheme: added new scheme
Section 5 – Revised Dresden Nuclear Voltage limits and communication of LTC change protocol.
Section 5 – SPOG 2-41: Renamed Grand Ridge from SPS to Load Rejection Scheme
Section 5 – SPOG 1-3-A: Updated current guidelines
Section 5 – SPOGs 1-3-B, SPOG 1-3-B-1: Updated scenarios for Powerton trip and additional guidance for high Top Crop WF output during outage of L0302 & L93505
Section 5 – SPOG 1-3-J: Added Multi-phase fault unit trip scheme for stability
Section 5 – SPOG 2-29: Corrected bus-tie name
Section 5 – SPOG 2-39: Minor clarifications
Section 5 – SPOG 3-27: Added additional detail
Section 5 – SPOG 3-31: Added additional detail
Section 5 – SPOG 3-32: Contingency triggering SPS revised. Additional detail added
Section 5 – Updated contingency name for “Operation of 23030 Tie at Mountain” Procedure
Attachment A – Waldwick Microprocessor rating operations updated under section 5. This Attachment is obsolete. Replaced with SPS Listing.
Attachment A – updated Planebrook title and description.
Attachment E – Added Automatic Sectionalizing Schemes for the DEOK Transmission Zone for upcoming integration, effective 1/1/2012.
Attachment E – Revised Burches Hill Automatic Sectionalizing Schemes for the PEPCO Transmission Zone due to upgrades
Attachment E – Corrected the title of Benning 230/69kV T9 Sectionalized for the PEPCO Transmission Zone
Added new Attachment F – STE ratings by zone.
Section 5 – Updated AEP Smith Mountain 138 kV Station Stability Limits

Clean Version: http://www.pjm.com/~/media/documents/manuals/m03.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m03-redline.ashx

Dave Souder (souder@pjm.com) is the contact for this manual.

Sent: Thursday, 12.01.2011 1:57 p.m.
Subject: Notification of Intent to Elect 40 Plus Alternative Option

As required by Section 6.8 of Attachment DD of the PJM OATT, PJM is hereby notifying market participants that a Capacity Market Seller has provided written notification of its intent to elect the 40 Plus Alternative Cost Recovery Factor (CRF) and recovery schedule option for the upcoming 2015/2016 Base Residual Auction.

Please direct any questions you may have to RPM_hotline@pjm.com.

Sent: Wednesday, 11.30.2011 1:39 p.m.
Subject: PJM.com

The pjm.com web server is temporarily off line. We are working on getting the issue corrected as soon as possible and will keep you updated. Thank you.

Sent: Tuesday, 11.29.2011 1:39 p.m.
Subject: JAN 2012 Auction (FTR) Dates

The Bidding Period for the PJM JAN 2012 Auction will open on Tuesday December 13, 2011 (0:00) and will close on Thursday December 15, 2011 (17:00).

The results will be posted by Thursday December 22, 2011 (17:00).

All FTR Auctions are financially binding.

The FTR Monthly Auction can be accessed using eFTR and entering bids into the "JAN 2012 Auction" market.

Valid bidding periods for the "JAN 2012 Auction" are JAN, FEB, MAR, and Q4.

Please remember to include the period in all submittals.

Valid bidding nodes are located at http://www.pjm.com/markets-and-operations/ftr/auction-user-info.aspx under the Monthly FTR Auctions section.

Sent: Tuesday, 11.23.2011 1:38 p.m.
Subject: The following PJM Manuals have been revised and posted to the PJM Web site.

Manual 13: Emergency Operations
Revision 45 (11/16/2011):

Revisions performed as part of 2011 annual review of M-13.
Updated Section 3.7 – Add clarity on the duration of an SMD event prior to taking action. Change SMD to GMD and company contacts.
Updated Section 2.3.2 and 5.2 – Remove language stating PJM would load Maximum Emergency Generation prior to issuing a Primary Reserve Warning.
Updated Attachment E – Clarified language on calculation of Net Zonal Capacity Position. Update screenshots of EMS load dump table.
Updated Attachment N – Added zonal load shed percentage for AEP zone for AEP/DOM IROL. Added DEOK zone placeholder.
Updated Attachment L – Removed references to Homeland Security Color scheme.
Updated SSR Part G to reflect ability for PJM to request units not be placed in max emergency.
Updates include what is needed for DEOK integration.

Manual 11: Energy & Ancillary Services Market Operations
Revisions 49 (01/01/2012):

Revisions made to reflect integration of the DEOK zone into the PJM footprint.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m11.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m11-redline.ashx

Mike Ward (wardm@pjm.com) is the contact for this manual.

Sent: Tuesday, 11.22.2011 10:17 a.m.
Subject: The following PJM Manuals have been revised and posted to the PJM Web site.

Manual 12: Balancing Operations

Revision 23 (11/16/2011):

Attachment A: Added note for clarity on IRC calculations. Need to reflect regulation assignments.
Attachment B: Updated language regarding PJM issuing PCLLRWs for non-market facilities.
Section 4.6.17: Remove this section completely to incorporate into M-27.
Section 4.6.15: Remove responsibility for GO to send blackstart test results to LCC.
Throughout: Update UDS and LAUDS to RT-SCED and IT-SCED, respectively.
Throughout: Update UDS and LAUDS to RT-SCED and IT-SCED, respectively.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m12.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m12-redline.ashx

Adam Keech (keecha@pjm.com) is the contact for this manual.

Manual 27: Open Access Transmission Tariff Accounting

Revision 77 (01/01/2012)

Updates to reflect the integration of the DEOK zone

Clean Version: http://www.pjm.com/~/media/documents/manuals/m27.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m27-redline.ashx

Harry E. Dessender (dessenhe@pjm.com) is the contact for this manual.

Manual 28: Operating Agreement Accounting

Revision 50 (01/01/2012):

Updates to reflect integration of the DEOK zone

Clean Version: http://www.pjm.com/~/media/documents/manuals/m28.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m28-redline.ashx

Harry E. Dessender (dessenhe@pjm.com) is the contact for this manual.

Sent: Wednesday, 11.09.2011 3:23 p.m.
Subject: eMarket: Updated Message

PJM continues to work on the eMKT issues that have been reported through Member Relations. The issues regarding NULL values on the Unit Hourly Update page have been resolved. The issues with browser-less data submittals should be resolved. If you need additional information or to report any issues, please contact the Hotline at 1-866-400-8980.

Sent: Wednesday, 11.06.2011 10:14 a.m.
Subject: eMarket Message

PJM is experiencing issues with submitting bids into eMarket. The current issues that members are experiencing are null value issues in unit hourly update and issues accessing eMarket. For unit hourly updates issues, please call 610-666-8807. The problem is being actively worked and we hope to have a resolution shortly. Another message will be sent when the issue has been resolved.

If you want additional information or need assistance, you can contact the Hotline at 1-866-400-8980.

Sent: Tuesday, 11.08.2011 11:31 a.m.
Subject: eMKT Message: Update

PJM continues to experience issues with submitting bids into eMarket so the bid submission deadline is being extended past 12:00 PM. The problem continues to be worked and we hope to have a resolution shortly. As more information becomes available on the issue another message will be sent. For additional information, you can contact the Hotline at 1-866-400-8980 or utilize the AC2 Migration dashboard.

Sent: Tuesday, 11.08.2011 9:22 a.m.
Subject: eMKT Message

PJM is experiencing issues with submitting bids into eMarket. The problem is being actively worked and we hope to have a resolution shortly. Another message will be sent when the issue has been resolved. If you want additional information, you can contact the Hotline at 1-866-400-8980 or utilize the AC2 Migration dashboard.

Sent: Thursday, 10.27.2011 12:08 p.m.
Subject: DEC 2011 Auction (FTR) Dates

The Bidding Period for the PJM DEC 2011 Auction will open on Friday November 11, 2011 (0:00) and will close on Tuesday November 15, 2011 (17:00).

The results will be posted by Tuesday November 22, 2011 (17:00).

All FTR Auctions are financially binding.

The FTR Monthly Auction can be accessed using eFTR and entering bids into the "DEC 2011 Auction" market.

Valid bidding periods for the "DEC 2011 Auction" are DEC, JAN, FEB, Q3 and Q4.

Please remember to include the period in all submittals.

Valid bidding nodes are located at http://www.pjm.com/markets-and-operations/ftr/auction-user-info.aspx under the Monthly FTR Auctions section.

Sent: Wednesday, 10.26.2011 8:25 a.m.
Subject: The following PJM Manual has been revised and posted to the PJM Web site.

The following PJM Manual has been revised and posted to the PJM Web site.

Manual 11: Energy & Ancillary Services Market Operations
Revisions 48 (10/20/2011):

Revision made to change the Synchronized Reserve Market interface from APSOUTH to the most limiting monitored transfer interface.
Revision made to the Synchronized Reserve maximum such that it can be less than or equal to the economic maximum for qualified resources that are granted exception due to a physical limitation.
Revision made to include Tier2 Synchronized Reserve floor offer of 0.1 MW in section 4.2.1.

Revisions 47 (10/20/2011):

Updated Section 3.2.1 to state that both Generation and Demand Resources must be able to provide 0.1 MW of Regulation Capability in order to participate in the Regulation Market.

Sent: Tuesday 10.18.2011 2:15 p.m.
Subject: Fall Daylight Savings Time Notification

Sent on behalf of Matt Pennell, Market Development:

This is a reminder that Daylight Savings Time will be occurring Sunday, November 6th at 2:00 AM.
Information regarding the 2011 Fall Daylight Savings Transition for the PJM eMKT application will be able to be found at:

http://www.pjm.com/markets-and-operations/etools/emkt.aspx

Please ensure that all demand bids and unit status are verified for the additional hour.

If you have any questions, please call the PJM Markets Hotline at 610-666-8998

Sent: Friday 10.14.2011 1:37 p.p.
Subject: LMP posting

Sent on behalf of Mike Ward:

PJM identified a Day Ahead LMP posting error for October 11, 2011 and October 12, 2011. The posting error occurred only for BEDINGTON, pnodeid 5022431, on both days. The corrected Day-Ahead LMP files for the issue have been posted to http://pjm.com/markets-and-operations/energy/day-ahead/lmpda.aspx

We apologize for any inconvenience.

Sent: Friday 10.14.2011 10:31 p.m.
Subject: The following PJM Manual has been revised and posted to the PJM Web site.

The following PJM Manual has been revised and posted to the PJM Web site. This information needs to be sent to the Customer Info Postings e-mail list.

Manual 01: Control Center Requirements
Revision 20 (10/12/2011):

Section 2.3.1 – Added 30 minute time limit to notification.
Section 2.5.6 – Added Member TO training responsibilities
Section 5.8.1 – Added requirement for BA annual check of Frequency and Time Error meters
Attachment B – Added months for submittals and changed Ref’s for Tie Line meter checks.
Reference cleanup.
Section 3.5 – corrected typo for acquisition frequency
Section 5.7 – added clarity to percentages
Changed “Self Certification” to Submittals Attachment “B”

Clean Version: http://www.pjm.com/~/media/documents/manuals/m01.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m01-redline.ashx

Adam Keech (keecha@pjm.com) is the contact for these manuals.

Sent: Wednesday 10.12.2011 2:22 p.m.
Subject: Day Ahead LMP

Sent on behalf of Mike Ward:

PJM has identified a Day Ahead LMP posting error for October 11, 2011 and October 12, 2011. The posting error occurred only for BEDINGTON, pnodeid 5022431, on both days. Pursuant to section 1.10.8 (e) of Attachment K-Appendix of the PJM Tariff and Schedule 1 of the Operating Agreement, PJM is providing notice of this issue and its intent to repost prices for October 11, 2011 and October 12, 2011.

PJM plans to repost LMPs for the BEDINGTON pnode for October 11, 2011 in hours ending 9-22 and October 12, 2011 in hours ending 10-22 on October 13, 2011.

We apologize for any inconvenience.

Sent: Friday 10.07.2011 3:02 p.m.
Subject: The following PJM Manual has been revised and posted to the PJM Web site.

Manual 14c: Generation and Transmission Interconnection Facility Construction:
Revision 06 (10/07/2011):

Updated PJM’s contact information in Attachment C: Generator As Built Data form.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m14c.ashx

Redline Version: http://www.pjm.com/~/media/documents/manuals/m14c-redline.ashx

Al Elmy (elmya@pjm.com) is the contact for this manual.

Sent: Monday, 09.26.2011 11:26 a.m.
Subject: NOV Auction (FTR) Dates

The Bidding Period for the PJM NOV 2011 Auction will open on Tuesday October 11, 2011 (0:00) and will close on Thursday October 13, 2011 (17:00).

The results will be posted by Thursday October 20, 2011 (17:00).

All FTR Auctions are financially binding.

The FTR Monthly Auction can be accessed using eFTR and entering bids into the "NOV 2011 Auction" market.

Valid bidding periods for the "NOV 2011 Auction" are NOV, DEC, JAN, Q3 and Q4.

Please remember to include the period in all submittals.

Valid bidding nodes are located at http://www.pjm.com/markets-and-operations/ftr/auction-user-info.aspx under the Monthly FTR Auctions section.

Sent: Monday, 09.23.2011 4:47 p.m.
Subject: 2013 2014 First Incremental Auction

Dear Participants,

The results of the 2013/2014 First Incremental Auction are now available on the PJM website and participant-level auction clearing results are available in the eRPM system under the Auctions tab.

A report describing the results is posted on the RPM Auction User Information website at http://www.pjm.com/markets-and-operations/rpm/~/media/markets-ops/rpm/rpm-auction-info/2013-2014-first-incremental-auction-report.ashx.

Questions regarding the RPM Auction Results should be directed to the rpm_hotline@pjm.com email address.

Sent: Monday, 09.23.2011 8:00 a.m.
Subject: The following PJM Manuals have been revised and posted to the PJM Web site.

Manual 28: Operating Agreement Accounting
Revision 49 (09/15/2011):

Section 2 Locational Marginal Pricing: Renamed Section 2 Interface Pricing and incorporated settlements interface pricing information. The Locational Marginal Pricing details were moved to Manual 11 in a previously approved revision.
Section 4.2 Regulation Credits: Added details on the regulation tolerance amounts used in the calculation of regulation lost opportunity cost credits.
Section 5.2.1 Credits for Pool-Scheduled Generating Resources: Clarified details on credits when PJM declares a Maximum Generation Emergency or a Maximum Generation Emergency Alert.
Section 5.2.8 Credits for Resource Providing Reactive Services: Description of reactive credits for synchronous condensers corrected for consistency with the Tariff (Attachment K – Appendix Section 3.2.3B(i)).
Section 7 Transmission Congestion Accounting – Replaced Total PJM Congestion Charges with Total Transmission Congestion Charges for consistency with Tariff terminology (Attachment K – Appendix Section 5.1.7). Clarified negative target allocations are hourly and based on net quantities.
Section 7.4.4 Monthly Allocation of Excess Congestion Charges – Added details on the end of Planning Period ARR and FTR transmission rights uplift charges for completeness. This information was previously only documented in Manual 6 – Financial Transmission Rights.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m28.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m28-redline.ashx

Manual 27: Open Access Transmission Tariff Accounting
Revision 76 (09/15/2011)

Section 4.1 Energy Imbalance Service Accounting Overview: Updated section to comply with current version of Schedule 4 of the Tariff.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m27.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m27-redline.ashx

Harry Dessender (dessenhe@pjm.com) is the contact for these manuals.

Sent: Friday, 09.16.2011 5:11 p.m.
Subject: The following PJM Manual has been revised and posted to the PJM Web site.

Manual 14B: PJM Region Transmission Planning Process

Revision 19 (09/15/2011):

Added Attachment H Power System Modeling Data

Clean Version: http://www.pjm.com/~/media/documents/manuals/m14b.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m14b-redline.ashx

Paul McGlynn (mcglyp@pjm.com) is the contact for this manual.

Sent: Friday, 09.16.2011 2:02 p.m.
Subject: LMP Network Model Update planned for September 28, 2011

The new network model build tentatively planned for September 21, 2011 has been changed and the file updated accordingly.

The new network model build is tentatively planned for September 28, 2011. The changes can be seen on the following link:

http://www.pjm.com/markets-and-operations/energy/lmp-model-info/bus-model-updates.aspx

If there are any questions, please call PJM Member Relations at 610-666-8980 or send an email to markets_hotline@pjm.com

Sent: Friday, 09.16.2011 12:09 p.m.
Subject: LMP Reposting

Sent on behalf of Rebecca Carroll:

PJM has identified a Real-Time LMP posting error for September 14, 2011. The posting error occurred for BLOSSBUR34 KV BLOSB, pnodeid 49507, BLOSSBUR13 KV UNITCT, pnodeid 50765, GREYVALL34 KV ATLANTIC, pnodeid 106856761, GREYVALL34 KV SULLIVAN, pnodeid 106856759, and GREYVALL34 KV TROYSUB, pnodeid 106856763, in hours ending 1-24. Pursuant to section 1.10.8 (e) of Attachment K-Appendix of the PJM Tariff and Schedule 1 of the Operating Agreement, PJM is providing notice of this issue and its intent to repost prices for September 14, 2011.

The BLOSSBUR34 KV BLOSB, BLOSSBUR13 KV UNITCT, GREYVALL34 KV ATLANTIC, GREYVALL34 KV SULLIVAN, and GREYVALL34 KV TROYSUB were the only busses posted incorrectly but are part of the zone listed below.

PnodeID	Name	Type
51300	PENELEC	ZONE

PJM plans to repost LMPs for the BLOSSBUR34 KV BLOSB, BLOSSBUR13 KV UNITCT, GREYVALL34 KV ATLANTIC, GREYVALL34 KV SULLIVAN, and GREYVALL34 KV TROYSUB TX1 busses and associated zone for September 14, 2011 on September 16, 2011.

We apologize for any inconvenience.

Sent: Tuesday, 09.13.2011 4:29 p.m.
Subject: AEP Black Start Resource RFP

This is a notification that a Request For Proposal (RFP) seeking additional black start resource was posted on PJM website. The black start resource request is in the Appalachian Power Company (AEP Transmission) territory.

Additional details and requirements are located at:
http://www.pjm.com/markets-and-operations/ancillary-services/black-start-service.aspx

Sent: Thursday, 09.01.2011 9:52 a.m.
Subject: The following PJM Manuals have been revised and posted to the PJM Website

Manual 14B: PJM Region Transmission Planning Process
Revision 18 (07/20/2011):

Added Light Load Reliability Analysis criteria and created a new attachment D-2 to contain the criteria.
Added description of reactive load modeling in CETL base cases.

Clean Version: http://pjm.com/~/media/documents/manuals/m14b.ashx

Redline Version: http://pjm.com/~/media/documents/manuals/m14b-redline.ashx

Paul McGlynn (mcglyp@pjm.com) is the contact for this manual

Sent: Tuesday, 08.30.2011 3:51 p.m.
Subject: LMP Re-posting for August 29, 2011

Sent on behalf of Rebecca Carroll:

The corrected Real-Time LMP file for the issue below has been posted to http://www.pjm.com/markets-and-operations/energy/real-time/lmp.aspx

PJM has identified a Real-Time LMP posting error for August 29, 2011. The posting error occurred for WHITEOA413 KV TX1, pnodeid 34885729, WHITEOA413 KV TX2, pnodeid 34885731 and TURNER4 35 KV TX1, pnodeid 34885683, in hours ending 1-10. Pursuant to section 1.10.8 (e) of Attachment K-Appendix of the PJM Tariff and Schedule 1 of the Operating Agreement, PJM is providing notice of this issue and its intent to repost prices for August 29, 2011.

The WHITEOA413 KV TX1, WHITEOA413 KV TX2 and TURNER4 35 KV TX1 were the only buses posted incorrectly but are part of the hub and zone listed below as well.

PnodeID	Name	Type
35010337	DOMINION HUB	HUB
34964545	DOM	ZONE

We apologize for any inconvenience.

Sent: Tuesday, 08.30.2011 12:17 p.m.
Subject: LMP Reposting

Sent on behalf of Rebecca Carroll:

PJM has identified a Real-Time LMP posting error for August 29, 2011. The posting error occurred for WHITEOA413 KV TX1, pnodeid 34885729, WHITEOA413 KV TX2, pnodeid 34885731 and TURNER4 35 KV TX1, pnodeid 34885683, in hours ending 1-10. Pursuant to section 1.10.8 (e) of Attachment K-Appendix of the PJM Tariff and Schedule 1 of the Operating Agreement, PJM is providing notice of this issue and its intent to repost prices for August 29, 2011.

The WHITEOA413 KV TX1, WHITEOA413 KV TX2 and TURNER4 35 KV TX1 were the only buses posted incorrectly but are part of the hub and zone listed below as well.

PnodeID	Name	Type
35010337	DOMINION HUB	HUB
34964545	DOM	ZONE

PJM plans to repost LMPs for the WHITEOA413 KV TX1, WHITEOA413 KV TX2 and TURNER4 35 KV TX1 bus and associated hub and zone for August 29, 2011 on August 30, 2011.

We apologize for any inconvenience.

Sent: Tuesday, 08.30.2011 10:14 a.m.
Subject: PJM Sell Offer prices for the upcoming 1st Incremental Auction for the 2013/2014 Delivery Year have been revised slightly

PJM Sell Offer prices for the upcoming 1st Incremental Auction for the 2013/2014 Delivery Year have been revised slightly and have been posted at http://www.pjm.com/markets-and-operations/rpm/~/media/markets-ops/rpm/rpm-auction-info/2013-2014-1st-incremental-auction-planning-paramaters.ashx. The revised prices are about .05% lower than the prices contained in the original posting and reflect a correction made to the price points of the Updated VRR Curve. The price points of the updated VRR curve are based on Net CONE expressed in UCAP terms. The initial posting incorrectly used the pool-wide average EFORd from the 2013/2014 Base Residual Auction as opposed to the updated pool-wide average EFORd for the 2013/2014 1st Incremental Auction in the determination of Net CONE in UCAP terms.

Sent: Monday, 08.29.2011 4:05 p.m.
Subject: Long Term 12/15 Auction (FTR) Dates - Round 2

The Bidding Period for the PJM 12/15 Long Term FTR Auction (round 2) will open on Thursday September 1, 2011 (0:00) and will close on Tuesday September 6, 2011 (17:00).

The results will be posted by Tuesday September 13, 2011 (17:00).

All FTR Auctions are financially binding.

The FTR Long Term Auction can be accessed using eFTR and entering bids into the "12/15 Long Term Auction" market.

Valid bidding periods for the "12/15 Long Term Auction" are YR1, YR2, YR3 and YRALL.

Please remember to include the period in all submittals.

Valid bidding nodes are located at http://www.pjm.com/markets-and-operations/ftr/auction-user-info.aspx under the Long Term FTR Auction section.

Sent: Monday, 08.29.2011 4:05 p.m.
Subject: OCT 2011 Auction (FTR) Dates

The Bidding Period for the PJM OCT 2011 Auction will open on Wednesday September 14, 2011 (0:00) and will close on Friday September 16, 2011 (17:00).

The results will be posted by Friday September 23, 2011 (17:00).

All FTR Auctions are financially binding.

The FTR Monthly Auction can be accessed using eFTR and entering bids into the "OCT 2011 Auction" market.

Valid bidding periods for the "OCT 2011 Auction" are OCT, NOV, DEC, Q3 and Q4.

Please remember to include the period in all submittals.

Valid bidding nodes are located at http://www.pjm.com/markets-and-operations/ftr/auction-user-info.aspx under the Monthly FTR Auctions section.

Sent: Wednesday, 08.25.2011 10:43 a.m.
Subject: The following PJM Manuals have been revised and posted to the PJM Web site.

The following PJM Manuals have been revised and posted to the PJM Web site. This information needs to be sent to the Customer Info Postings e-mail list.

Manual 36: System Restoration
Revision 15 (08/17/2011):

Annual Review of entire Manual
Minor formatting changes
Update of Attachment F and added DEOK
Updated Attachment B - Initial and Hourly Restoration Reports (added DEOK)
Updated Attachment G – TO Coordination Checklist (Table 1) (added DEOK)
Updated Table 1- PJM Table of Major Synchronization Devices(added DEOK)

Clean Version: http://www.pjm.com/~/media/documents/manuals/m36.ashx

Redline Version: http://www.pjm.com/~/media/documents/manuals/m36-redline.ashx

Glen Boyle (boyleg@pjm.com) is the contact for this manual.

Sent: Tuesday, 08.23.2011 2:38 p.m.
Subject: eFTR & RPM notice
Forwarded on behalf of Dean Hartung, Manager, Market Development

Dear Members:

Please be advised that the system outage noted below will change from Wednesday evening, August 24, 2011 to Monday evening, August 29, 2011. System unavailability times are as follows:

eFTR is expected to be unavailable from 19:00 Mon to 07:00 Tue and
eRPM will be unavailable from 19:00 Mon to 23:30 Mon.

Communications will also be provided via PJM’s eSuite.

Sent: 08.22.2011 10:30 a.m.
Subject: eFTR & RPM notice
Sent on behalf of Dave Anders, Manager, Stakeholder Affairs

Dear Members:

Please be advised that system outages for eFTR and eRPM are currently planned for Wednesday evening, August 24, 2011 commencing at 7:00 p.m. The purpose of these outages is to allow migration of these functions to the applications being delivered under PJM's Advanced Control Center program. eFTR is expected to be unavailable from 19:00 Wed to 07:00 Thu and eRPM will be unavailable from 19:00 Wed to 23:30 Wed. Communications regarding migration status and completion will be provided via PJM's eSuite. If you have any questions, please contact PJM's Hotline at 610.666.8980.

Thank you,
Dave Anders
Manager, Stakeholder Affairs

Sent: Tuesday, 07.26.2011 2:38 p.m.
Subject: FTR Auction

PJM will be implementing FTR Auction bid limits effective with the September FTR Auction. The maximum amount of bids that can be submitted for any individual period for an auction will be 10,000 bids. This limit is not a total auction bid limit but rather a per period bid limit. This enforcement is necessary due to the increased participation in the FTR markets which has resulted in degrading system performance in the FTR Auction clearing process.

Sent: Thursday, 07.21.2011 4:53 p.m.
Subject: The following PJM Manuals have been revised and posted to the PJM Website.

Manual 14D: Generator Operational Requirements
Revision 19 (7/20/2011):

Section 4: Data Exchange and Metering Requirements: Edits to Section 4.1.6 to delete outdated SCADA details.
Section 6: Pre-Operational Requirements: Edits to Section 6.3.3 to update and clarify test energy requirements for new interconnecting resources.
Section 7: Generator Operations: Added new Section 7.1.3 to address notification of automatic voltage regulator and power system stabilizer status changes to PJM Dispatch.
Attachment C: New PJM Customer Voice / All Call Communications Request Form: Replaced form with updated version.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m14d.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m14d-redline.ashx

David Schweizer (schwed@pjm.com) is the contact for this manual.

Sent: Wednesday, 07.20.2011 11:20 a.m.
Subject: ATSI Black Start Resource RFP

This is a notification that a Request For Proposal (RFP) seeking additional black start resource was posted on PJM website. The black start resource request is located near Warren, OH in the American Transmission Systems, Inc. territory.

Additional details and requirements are located at:
http://www.pjm.com/markets-and-operations/ancillary-services/black-start-service.aspx

Sent: Friday, 07.15.2011 4:40 p.m.
Subject: The following PJM Manuals have been revised and posted to the PJM Website.

Manual 19: Load Forecasting and Analysis
Revision 17 (07/14/2011):

Attachment A: 24 hour data submission required and additional clarification for use of generation data to substantiate compliance (FERC Docket #: ER11-2898-000, 4/18/11). Also added revisions concerning how add backs are applied to DLC as approved by the MRC.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m19.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m19-redline.ashx

Tom Falin (falint@pjm.com) is the contact for this manual.

Sent: Friday, 07.08.2011 9:52 a.m.
Subject: The 2012/2013 2nd Incremental Auction planning parameters that were initially posted on 6/17/2011 inadvertently omitted 240 MW of non-zonal network load from the forecast peak load

The 2012/2013 2nd Incremental Auction planning parameters that were initially posted on 6/17/2011 inadvertently omitted 240 MW of non-zonal network load from the forecast peak load. The planning parameters have been updated to now include this load in the forecast peak and RTO reliability requirements. The updated planning parameters have been reposted and are located at http://www.pjm.com/markets-and-operations/rpm/~/media/markets-ops/rpm/rpm-auction-info/2012-2013-2nd-incremental-auction-planning-parameters.ashx. Planning parameters that have changed as a result of this update are highlighted in red font to clearly show the impact of the update. The initial planning parameters showed PJM seeking to release a total of 3,553.9 MW in the upcoming auction whereas the updated planning parameters show PJM seeking to release 3,294.1 MW. Also, the update impacts only the quantity that PJM will seek to release in the rest of RTO region (i.e, the area encompassing the AEP, APS, COMED, DAY, DOM and DUQ zones). The MW quantity and price of PJM sell offers in all other LDAs are unaffected by the update.

Sent: Tuesday, 06.28.2011 9:56 a.m.
Subject: The following PJM Manuals have been revised and posted to the PJM Website.

Manual 35 - Definitions and Acronyms
Revision 19 (06/24/2011):

Revised the following Acronyms
FCA - Forecast Applications
LF - Load Forecast
LFH - Load Forecast, Hourly (hourly interval for seven days)
LFM - Load Forecast, Five Minute (five minute interval for six hours)
NIS - Net Interchange Schedule
NISF - Net Interchange Schedule Forecast
NN - Neural Networks
STLF - Short Term Load Forecast (hourly interval for seven days)
VSTLF - Very Short Term Load Forecast (five minute interval for six hours)
WEA - Weather Services
WPF - Wind Power Forecast
CDS - Cost Development Subcommittee
PLS - Parameter Limited Schedules
DMS - Data Management Subcommittee
DRS - Demand Response Subcommittee
DTS - Dispatcher Training Subcommittee
MSS - Market Settlements Subcommittee
RAAS - Resource Adequacy Analysis Subcommittee
RTS - Relay Testing Subcommittee
BSSTF - Black Start Service Task Force
FTRTF - FTR Task Force
IRTF - Intermittent Resources Task Force
LMTF - Load Management Task Force
RPPTF - Regional Planning Process Task Force
Added the following definitions:
Black Start Service
Black Start Plant
Black Start unit to conform to the definitions in the OATT
Carrying Charges
Cost Based Offers
Direct Costs
Economic Demand Response
Emergency Demand Response
Energy Market Opportunity Costs
Indirect Costs
Interconnection Queue Close Date
Interconnection Customer
Parameter Limited Schedules
Pnodes
Queue Date
Regulation Market Clearing price (RMCP)
Synchronized Reserve Market
Updated Cost Development Task Force to Cost Development Subcommittee

Clean Version: http://www.pjm.com/~/media/documents/manuals/m35.ashx

Redline Version: http://www.pjm.com/~/media/documents/manuals/m35-redline.ashx

John Gdowik (gdowikjw@pjm.com) is the contact for this manual.

Sent: Monday, 06.27.2011 12:00 p.m.
Subject: AUG 2011 Auction (FTR) Dates

The Bidding Period for the PJM AUG 2011 Auction will open on Monday July 11, 2011 (0:00) and will close on Wednesday July 13, 2011 (17:00).

The results will be posted by Wednesday July 20, 2011 (17:00).

All FTR Auctions are financially binding.

The FTR Monthly Auction can be accessed using eFTR and entering bids into the "AUG 2011 Auction" market.

Valid bidding periods for the "AUG 2011 Auction" are AUG, SEP, OCT, Q2, Q3 and Q4.

Please remember to include the period in all submittals.

Valid bidding nodes are located at http://www.pjm.com/markets-and-operations/ftr/auction-user-info.aspx under the Monthly FTR Auctions section.

Sent: Tuesday, 06.21.2011 10:01 a.m.
Subject: Real-Time LMP

PJM has identified a Real-Time LMP posting error for June 17, 2011. The posting error occurred for the TREDYFFR 13 KV 2BUS in hour ending 23 and for the MONOCACY 35 KV T3 in hours ending 15 and 16. Pursuant to section 1.10.8 (e) of the PJM Tariff and Operating Agreement, PJM is providing notice of this issue and its intent to repost prices for June 17, 2011.

The TREDYFFR 13 KV 2BUS and MONOCACY 35 KV T3 buses were the only buses posted incorrectly but they are part of the zones and aggregates listed below as well.

PnodeID	Name	Type
8394954	APS	ZONE
22465574	THURMONT - AP	AGGREGATE
51297	PECO	ZONE

The updated LMPs for the TREDYFFR 13 KV 2BUS and MONOCACY 35 KV T3 buses and associated zones and aggregates are available now by clicking on the link below.

http://www.pjm.com/markets-and-operations/energy/real-time/lmp.aspx

We apologize for any inconvenience.

Sent: Wednesday, 06.08.2011 4:15 p.m.
Subject: PJM Working to Enhance Browser Support

PJM Working to Enhance Browser Support - PJM is researching the compatibility of our websites and eTools with newer versions of Web browsers to improve support for our members. Currently, PJM’s website tools require a specific version of Internet Explorer to ensure that all functions work properly. To better support members’ needs, PJM will explore supporting newer versions of Internet Explorer and some alternative browsers.

Current Phase - PJM is testing the compatibility of our websites and eTools with a variety of operating systems and browsers. At the conclusion of this first phase, planned for mid-summer, PJM will report its findings to members. With the results of this research, PJM will plan its official support for a broader set of Web browsers for some of our websites and will upgrade other systems that currently depend on very specific browsers and versions.

Next Phase - After PJM has identified the website tools that do not support newer browser versions, we will prioritize development efforts to bring all tools current with newer browser standards. PJM will communicate the scope of this effort and expected milestones with members to help them manage upgrade schedules and expectations.

Feedback - We appreciate your feedback and would like to know of specific browser issues that you and your organization have encountered attempting to use various browsers on the PJM websites. PJM invites you to provide specific feedback to PJM on these issues either from the website or from the link below.

http://www.pjm.com/about-pjm/browser-compatibility.aspx

Sent: Friday, 06.03.2011 11:10 a.m.
Subject: Message to Customers of eMKT

PJM is currently experiencing performance issues with eMKT. We are working with our vendor and are targeting a resolution as soon as possible. Until that resolution is in place, market participants, to the extent possible, should refrain from submitting large amounts of data as it will increase their likelihood of encountering the performance issue. Participants should attempt to keep their data submittal volumes to a minimum and if they receive a failure(s) to perform a re-submittal attempt. Thank you.

Sent: Tuesday, 05.31.2011 5:34 p.m.
Subject: The following PJM Manuals have been revised and posted to the PJM Website.

Manual 15 - Cost Development Guidelines
Revision 17
Effective Date: 06.01.2011

Section 2.6.1, Exhibit 1: Updated Handy Whitman Index Numbers for the year 2011.
Section 9: Opportunity Cost Guideline is updated per the informational filing submitted by PJM on May 12, 2011, in Docket No. EL08-47-005.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m15.ashx

Redline Version: http://www.pjm.com/~/media/documents/manuals/m15-redline.ashx

Stanley Williams (willis@pjm.com) is the contact for this manual.

Manual 20 - PJM Resource Adequacy Analysis
Revision 4
Effective Date: 06.01.2011

Added Section 5: DR Reliability Target Analysis Procedures.
Updated the entire manual to reflect current analysis and modeling methods.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m20.ashx

Redline Version: http://www.pjm.com/~/media/documents/manuals/m20-redline.ashx

Tom Falin (falint@pjm.com) is the contact for this manual.

Sent: Friday, 05.27.2011 2:44 p.m.
Subject: The following PJM Manual has been revised and posted to the PJM Website.

Manual 39 - Nuclear Plant Interface Coordination
Revision 3 (06.01.2011):

Changed manager ownership to Generation Department based on PJM reorganization
Attachment B: Added Perry and Davis Besse NPIR as part of ATSI Integration into PJM
Attachment C: Updated Perry and Davis Besse NPIR revision

Clean Version: http://www.pjm.com/~/media/documents/manuals/m39.ashx

Redline Version: http://www.pjm.com/~/media/documents/manuals/m39-redline.ashx

David Schweizer (schwed@pjm.com) is the contact for this manual.

Sent: Thursday, 05.26.2011 10:19 a.m.
Subject: The following PJM Manuals have been revised and posted to the PJM Website.

Manual 13 - Emergency Operations
Revision 44 (05/26/2011):

Updated tables in Attachments E and F which had errors in the previous posting of revision 43.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m13.ashx

Redline Version: http://www.pjm.com/~/media/documents/manuals/m13-redline.ashx

Adam Keech (keecha@pjm.com) is the contact for this manual.

Manual 18: PJM Capacity Market
Revision 12 (05/25/2011):

Confirming Revisions for FERC Order ER11-2898, accepted on 04/04/2011 and effective 04/18/2011, to include changes for:
Requirement to provide meter data on a 24-hour basis during the day on which a Load Management event or performance test occurs and for all hours during any other days as required by PJM to calculate load reduction
Avoiding double assessment of a penalty (penalty for both RPM Commitment Compliance and Load Management Event or Test Compliance) for a Demand Resource
Modification to the load management retest rules
Modification and clarification of the rules for use of Demand Resources as replacement capacity
Confirming Revisions for FERC Order ER11-1909, accepted on 12/20/2010 and effective on 12/27/2010, to include a change to clarify the definition of an EE Resource to reflect that a project qualifying as an EE Resource is one installed at an end-use customer’s retail site.
Revisions to EFORd used for a generation resource in the initial evaluation of a FRR Entity’s FRR Capacity Plan for a Delivery Year as approved by stakeholders at the MRC on August 5, 2010.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m18.ashx

Redline Version: http://www.pjm.com/~/media/documents/manuals/m18-redline.ashx

Jeff Bastian (bastian@pjm.com) is the contact for this manual.

Sent: Tuesday, 05.24.2011 2:36 p.m.
Subject: JUL 2011 Auction (FTR) Dates

The Bidding Period for the PJM JUL 2011 Auction will open on Monday June 13, 2011 (0:00) and will close on Wednesday June 15, 2011 (17:00).

The results will be posted by Wednesday June 22, 2011 (17:00).

All FTR Auctions are financially binding.

The FTR Long Term Auction can be accessed using eFTR and entering bids into the "JUL 2011 Auction" market.

Valid bidding periods for the "JUL 2011 Auction" are JUL, AUG, SEP, Q2, Q3 and Q4.

Please remember to include the period in all submittals.

Valid bidding nodes are located at http://www.pjm.com/markets-and-operations/ftr/auction-user-info.aspx under the Monthly FTR Auctions section.

Sent: Tuesday, 05.24.2011 11:23 a.m.
Subject: Long Term 12/15 Auction (FTR) Dates - round 1

The Bidding Period for the PJM 12/15 Long Term FTR Auction (round 1) will open on Wednesday June 1, 2011 (0:00) and will close on Friday June 3, 2011 (17:00).

The results will be posted by Friday June 10, 2011 (17:00).
All FTR Auctions are financially binding.

The FTR Long Term Auction can be accessed using eFTR and entering bids into the "12/15 Long Term Auction" market.

Valid bidding periods for the "12/15 Long Term Auction" are YR1, YR2, YR3 and YRALL.

Please remember to include the period in all submittals.

Valid bidding nodes are located at http://www.pjm.com/markets-and-operations/ftr/auction-user-info.aspx under the Long Term FTR Auction section.

Sent: Friday, 05.20.2011 5:31 p.m.
Subject: The following PJM Manual has been revised and posted to the PJM Website.

The following PJM Manual has been revised and posted to the PJM Website.

Manual 13 - Emergency Operations
Revision 43 (05/19/2011):

Updated Attachment N – IROL Load Dump table to reflect ATSI integration and new TRAIL line for 6/1/2011.
Updated Attachment E
Updated Attachment F

Sent: Wednesday, 05.18.2011 10:23 a.m.
Subject: The following PJM Manual has been revised and posted to the PJM Website.

Manual 12 - Balancing Operations pdfPDF
Revision 22 (05/13/2011):

Attachment A: Updated to reflect June 2010 changes to IRC reporting.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m12.ashx

Redline Version: http://www.pjm.com/~/media/documents/manuals/m12-redline.ashx

Adam Keech (keecha@pjm.com) is the contact for this manual.

Sent: Friday, 05.13.2011 4:58 p.m.
Subject: 2014/2015 RPM Base Residual Auction Results

Dear Participants,

The results of the 2014/2015 RPM Base Residual Auction are now available on the PJM website and participant-level auction clearing results are available in the eRPM system.

The Base Residual Auction Report is located at http://www.pjm.com/markets-and-operations/rpm/~/media/markets-ops/rpm/rpm-auction-info/20110513-2014-15-base-residual-auction-report.ashx

Questions regarding the RPM Auction Results should be directed to the rpm_hotline@pjm.com email address.

Sent: Wednesday, 05.11.2011 5:39 p.m.
Subject: The following PJM Manuals have been revised and posted to the PJM Website.

Manual 01 - Control Center and Data Exchange Requirements
Revision 19 (05/06/2011):

Sections 1 & 2 – Updated references to Manuals
2.3.1 – Clarified member TO requirements for security analysis capability
2.4 – Clarified 3 part communication
2.7 – Clarified back up capability
4.2.4 – Clarified 3 part communication
5.8.1 – Updated references to Manuals
Attachment A, H2 – Removed MAAC
Attachment C5 – Clarified process.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m01.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m01-redline.ashx

David Vicini (vicind@pjm.com) is the contact for this manual.

Manual 27 - Open Access Transmission Tariff Accounting
Revision 75 (06/01/2011):

Updates to reflect the integration of the ATSI zone and creation of PJM Settlement, Inc.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m27.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m27-redline.ashx

Harry Dessender (dessenhe@pjm.com) is the contact for this manual.

Manual 29 - Billing
Revision 22 (06/01/2011)
Updates to reflect integration of ATSI zone and creation of PJM Settlement, Inc.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m29.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m29-redline.ashx

Harry Dessender (dessenhe@pjm.com) is the contact for this manual.

Manual 36 - System Restoration
Revision 14 (04/27/2011):

Updated Attachment B - Initial and Hourly Restoration Reports
Updated Attachment F - Figure 1 TO Restoration Document References
Updated Attachment G – TO Coordination Checklist (Table 1)
Updated Attachment H – UFLS Table
Updated Table 1- PJM Table of Major Synchronization Devices

Clean Version: http://www.pjm.com/~/media/documents/manuals/m36.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m36-redline.ashx

Glen Boyle (boyleg@pjm.com) is the contact for this manual.

Manual 38 - Operations Planning
Revision 05 (05/01/2011):

Annual Review
Revised Attachment A: OATF Scope revised to include Cleveland Public Power (CPP) and the Cleveland reactive interface.
Revised Attachment B: Transmission Reliability Analysis Procedure Section B.2 to include specific steps to capture the impacts of MISO wind in the study case.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m38.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m38-redline.ashx

Dave Souder (souder@pjm.com) is the contact for this manual.

Manual 03 - Transmission Operations
Revision 38 (04/27/2011):
Throughout – Formatting changes to tables to meet with current PJM style set.
Throughout – Replaced references to “Conectiv” with “PHI – Pepco Holdings, Inc.” or “AE-PHI” where appropriate.
Throughout – Replaced references to “Orange” with “Maliszewski” wherever the reference was to the former “Orange” 765/138kV substation within AEP.
Section 1.3 – Note added regarding TO requirements for real-time network analysis within Transmission Operations Guidelines.
Section 2.1 – Revised wording for Note1 from “may operator” to “may operate” within Thermal Operating Criteria section.
Section 2, end – Revised wording for Exhibit 1 PJM Actual Overload Thermal Operating Policy table from a Guideline to a Policy and revised text within said table to correspond with Load Shed Determination Procedure.
Section 3.2 – Revised section title from Voltage Operating Criteria & Guidelines to Voltage Operating Criteria & Policy and relevant wording within section from “Guideline” to “Policy”.
Section 3.3.3 – Clarified the Voltage Schedule and Bandwidth rows as being ‘kV’ values within the Generator Voltage Schedules table.
Section 3.8 – Reformatted the Interface line definitions for clarity within the Transfer Limits section. Added the future Mt Storm – Meadowbrook 500kV line to the AP South definition, and added the CLVLND reactive interface both with an effective date of 6/1/2011.
Section 3.9 – Revised UGI’s 69kV voltage limits within Exhibit 5: Bus and Zone Specific Variations to PJM Base Line Voltage Limits to appropriate voltage limits for their 66kV network. Added entries for ATSI and CPP for upcoming integration, effective 6/1/2011.
Section 4.2 – Inserted subsection 4.2.6 Peak Period Outage Scheduling Guidelines. To accommodate, former subsections 4.2.6 through 4.2.12 all advanced by one and are now 4.2.7 through 4.2.13.
Section 4.2.9 – Revised wording from ‘ … may lose its priority … ‘ to ‘may lose its priority’ within the Rescheduling Outages subsection.
Section 4.5 – Updated the Transmission Outage Acceleration Process to provide clarifications, aligning manual with tariff language.
Section 5 – Revised all Single Breaker Derate tables to utilize standardized ‘NL’, ‘EM’, ‘LT’, ‘ST’ and/or ‘LD’ limit titles where appropriate within the Operating Procedures for all Transmission Zones with applicable Single Breaker Derate tables.
Section 5 – Added Load Shed Determination Procedure and Load Shed Directive within the Operating Procedures for the PJM RTO and applicable index tables.
Section 5 – Corrected wording in reference to the “J” and “K” lines in the PSEG/ConEd Wheel within the Operating Procedure for the PJM RTO.
Section 5 – Revised NL & EL voltage limits for the Dresden units 2 & 3 in Voltage Control at Nuclear Stations within the Operating Procedures for the PJM RTO. Added Davis-Besse and Perry in same section effective upon ATSI integration, 6/1/2011.
Section 5 – Added a Directional Ratings procedure within the Operating Procedures for the AE Transmission Zone and applicable index tables.
Section 5 – Added AEP Single Breaker Derates within the Operating Procedures for the AEP Transmission Zone and applicable index tables.
Section 5 – Updated the Smith Mountain 138kV Station Stability procedure within the Operating Procedures for the AEP Transmission Zone.
Section 5 – Updated to classify Fast Valving and Emergency Unit Tripping as part of the overall SPS at Rockport in the Rockport Operating Guide within the Operating Procedures for the AEP Transmission Zone.
Section 5 – Revised the Twin Branch – Argenta (Conservative Operations) procedure to clearly identify the potential IROL limits within the Operating Procedures for the AEP Transmission Zone.
Section 5 – Renamed/Revised the Pleasants and Oak Grove Operating Restrictions to the Belmont SPS within the Operating Procedures for the AP Transmission Zone and applicable index tables to reflect the redundancy added to the preexisting relay scheme.
Section 5 – Added Bus Voltage Exceptions within the Operating Procedures for the AP Transmission Zone and applicable index tables.
Section 5 – Added/Revised rating sets for Bedington, Belmont, Black Oak, Cabot, Doubs, Ft Martin, Harrison, Hatfield, Meadowbrook, Pruntytown, South Bend, Wylie Ridge & Yukon 500kV CBs in the Breaker Derate Table within the Operating Procedures for the AP Transmission Zone.
Section 5 – Revised the ratings with one breaker in service for the Waugh Chapel – Calvert Cliffs ‘5052’ 500kV line in the Breaker Derate Table within the Operating Procedures for the BC Transmission Zone.
Section 5 – Added a DPL Transmission Zone section within the Operating Procedures and applicable index tables.
Section 5 – Added a Directional Ratings procedure within the Operating Procedures for the DPL Transmission Zone and applicable index tables.
Section 5 – Added Note, explaining limitation of one pump per GSU for a duel pump trip, to Bath County SPS procedure within the Operating Procedures for the DOM Transmission Zone.
Section 5 – Added an FE-ATSI Transmission Zone section within the Operating Procedures with an Effective Date of the PJM-ATSI/CPP Integration, 6/1/2011. Added to all applicable index tables.
Section 5 – Added Mansfield Unit Stability Restrictions and Richland Substation SPS within the Operating Procedures for the FE-ATSI Transmission Zone and applicable index tables.
Section 5 – Removed TMI Voltage Notification Procedures, as the limits for 1 Auxiliary Transformer and 2 Auxiliary Transformers are now the same, within the Operating Procedures for the FE Transmission Zone[h1] and applicable index tables.
Section 5 – Renamed/Reordered Operating Procedures and associated index tables for FE Transmission Zones.
Section 5 – Added the Homer City Stability Limits within the Operating Procedures for the FE Transmission Zone and applicable index tables.
Section 5 – Revised the table and procedure based upon most recent study results in the Conemaugh/Hunterstown Stability Limits within the Operating Procedures for the FE Transmission Zone.
Section 5 – Revised wording from “500 Conemaugh – Keystone 500kV line” to “5003 Conemaugh – Keystone 500kV line” in the Conemaugh #2 Stability Trip within the Operating Procedures for the FE Transmission Zone.
Section 5 – Clarified control modes for the 138kV Capacitor Banks for the Elmhurst SVC within the Operating Procedures for the ComEd Transmission Zone.
Section 5 – Removed reference to retired SPOGs 1-3-I-1 and 1-8 within the Operating Procedures for the ComEd Transmission Zone.
Section 5 – Removed reference to retired SPOG 1-3-C-1 from Quad Cities and Cordova Stability Limitations [SPS] within the Operating Procedures for the ComEd Transmission Zone.
Section 5 – Removed retired SPOG 3-21 107_Dixon ‘L15621’ 138 kV CB Operation within the Operating Procedures for the ComEd Transmission Zone and applicable index tables.
Section 5 – Added Wolfs TR81 [SPS] within the Operating Procedures for the ComEd Transmission Zone and applicable index tables.
Section 5 – Revised and renamed the former Sandwich 138kV Bus Tie Circuit Breaker [SPS] to Wolfs Crossing-Sandwich 138kV 14302 line [SPS] due to changes associated with the SPS and the applicable ComEd SPOG 3-31 within the Operating Procedures for the ComEd Transmission Zone and applicable index tables.
Section 5 – Added Electric Junction – North Aurora 138kV 11106 line [SPS] due to changes associated with SPOG 3-27 within the Operating Procedures for the ComEd Transmission Zone and applicable index tables.
Section 5 – Added Highland Park Transfer Trip [SPS] within the Operating Procedures for the ComEd Transmission Zone and applicable index tables.
Section 5 – Added Zion Generation Stability Trip [SPS] within the Operating Procedures for the ComEd Transmission Zone and applicable index tables.
Section 5 – Added Camp Grove Islanding within the Operating Procedures for the ComEd Transmission Zone and applicable index tables.
Section 5 – Removed the Elrama 138/69kV Auto Transformer Operation procedure within the Operating Procedures for the DLCO Transmission Zone and applicable index tables due to transformer replacement.
Section 5 – Revised the Common Trench Cable Ratings within the Operating Procedures for the PEPCO Transmission Zone.
Section 5 – Revised status to normally ‘Disabled; And, Enabled as needed’ for the Peach Bottom ‘45’ 500kV CB SPS and the Peach Bottom ‘35’ 500kV CB SPS within the Operating Procedures for the PE Transmission Zone[h2].
Section 5 – Removed 2 lines pertaining to North & South bus outage restrictions and applicable Note from the Montour Stability Restrictions within the Operating Procedures for the PL Transmission Zone.
Section 5 – Removed the Hosensack – Buxmont 230kV Line Contingency procedure within the Operating Procedures for the PL Transmission Zone and applicable index tables as the scheme is no longer required and has been disabled.
Section 5 – Associated the PSE&G Artificial Island Stability procedure with the A.I. (Salem) Cross Trip Scheme and designated it as an [SPS] within the Operating Procedures for the PS Transmission Zone.
Section 5 – Removed the 500kV ‘3-4’ & ‘4-4A’ CBs @ Branchburg, the New Freedom 500kV ‘2-6’, ‘2-8’ & ‘9-10’ CB, the 138kV ‘4-5’ & ‘5-6’ CB @ Trenton and the 230kV ‘1-5’ & ‘5-6’ CBs @ Linden; Added the 500kV ‘2-6’ & ‘5-6’ CBs @ Deans; Revised the 500kV ‘1-3’ CB @ Hope Creek; All within the Breaker Derate Table for the PS Transmission Zone.
Section 5 – Revised to reflect area upgrades the Operation of 23030 Tie at Mountain and UGI/PL 66kV Tie Line Operation procedures within the Operating Procedures for the UGI Transmission Zone. Removed the Hunlock Outlet Overloads procedure from same.
Section 5 – Properly identified the Clover Generation Shed Scheme as an “[SPS]” within the Operating Procedures for the VP Transmission Zone.
Attachment B – Open Circuit Terminal Voltage Control table updated to reflect present PJM EHV lines.
Attachment E – Added Automatic Sectionalizing Schemes for the PPL & UGI Transmission Zone which are effective as of March 1, 2011. Removed three Automatic Sectionalizing Schemes related to the Matt Funk 345kV for the AEP Transmission Zone due to upgrades .
Exhibits – Added wording to indicate the Juniata PLC trip for high voltage is currently off within Exhibit 4: Capacitor Installations with PLCs.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m03.ashx
Redline Version: http://www.pjm.com/~/media/documents/manuals/m03-redline.ashx

Dave Souder (souder@pjm.com) is the contact for this manual.

Sent: Friday, 05.06.2011 5:00 p.m.
Subject: The following PJM Manual has been revised andposted to the PJM Website.

Manual 11: Energy & Ancillary Services Market Operations
Revisions 46 (06/01/2011):

Revisions made to reflect integration of the ATSI zone into the PJM footprint.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m11.ashx

Redline Version: http://www.pjm.com/~/media/documents/manuals/m11-redline.ashx

Mike Ward (wardm@pjm.com) is the contact for this manual.

Sent: Friday, 05.06.2011 3:13 p.m.
Subject: Updated ATSI Integration Whitepaper

Dear Participants,

The ATSI Integration Whitepaper has been updated to include details on the 1:00 a.m. EPT ATSI integration cutover and how the resulting 23 hour PJM market day for the ATSI zone will be handled. The whitepaper is accessible via the ATSI Integration web page and the following link: http://www.pjm.com/markets-and-operations/market-integration/~/media/markets-ops/atsi-integration/atsi-integration-whitepaper.ashx

Questions related to the cutover may be directed to Frank Koza (kozaf@pjm.com or 610-666-4228).

Sent: Tuesday, 05.03.2011 4:34 p.m.
Subject: Urgent Message for 2014/2015 RPM BRA Suppliers

Dear Members,

This is a reminder to all eligible RPM suppliers of generation, DR and EE resources that the offer window for the 2014/2015 Base Residual Auction (BRA) opened on Monday, May 2, 2011 and closes on Friday, May 6, 2011. All RPM suppliers must submit offers into eRPM by 5:00 pm on May 6, 2011; however, in order to balance the work load on PJM systems and personnel, PJM urges suppliers to submit offers as early in the week as possible. PJM strongly recommends that suppliers enter offers into eRPM by the close of business on Thursday May 5, 2011. Once entered, offers may be revised up to the close of the offer window on May 6, 2011. Due to the high volume of calls expected, PJM staff will make every effort to respond in a timely manner but suppliers may experience a delay in the receipt of a response. Placing offers into the eRPM system early in the week will help to reduce potential delays.

Also as a reminder, RPM suppliers must confirm the modeling of each of their capacity resources prior to submitting offers for the 2014/2015 BRA. RPM suppliers must verify the following characteristics for generation, DR, or EE resources for which they have a positive Available ICAP position for the RPM Auction: Zone Assignment and LDA Assignment. For generation resources, RPM suppliers must also verify Unit Location by State, Unit Type, and Unit Fuel Type. RPM suppliers must confirm the modeling of each resource before offers are accepted for a given Auction. For more detailed instructions on how to confirm the modeling of your capacity resources through eRPM, please refer to Task 1: Resource Confirmation in the Auctions section of the eRPM User Guide at: http://www.pjm.com/markets-and-operations/~/media/markets-ops/rpm/erpm-user-guide.ashx.

New for 2014/2015:

RPM suppliers offering coupled DR Offers must create a resource couple in the Resource Coupling section of eRPM prior to submitting an offer. For detailed instructions on how to create a resource couples refer to the eRPM Instructions to Create Coupled Resources document.
RPM Suppliers wishing to utilize the Credit Limited Offer Clearing functionality for Planned resources must submit an Maximum Post-Auction Credit Exposure value in the MPCE field on the Resource Offer screen. If you do not wish to utilize this functionality, or do not have a planned resource, please leave the MPCE column blank.

A list of Frequently Asked Questions related to the BRA has been complied and is available for review on the RPM Auction User Information Page: http://www.pjm.com/markets-and-operations/rpm/~/media/markets-ops/rpm/rpm-auction-info/rpm-base-residual-auction-faqs.ashx.

If you have any questions, please contact the RPM Hotline at rpm_hotline@pjm.com.

Sent: Tuesday, 05.03.2011 1:25 p.m.
Subject: Regulation Market Clearing Price (RMCP)Revised and Reposted for HE6 of May 2, 2011

Regulation Market Clearing Price (RMCP) for hour ending 6 of May 2, 2011 was revised and reposted because the marginal resource did not regulate in real-time. The RMCP changed from $140.87 to $37.35.

Please call or email PJM Markets Hotline if you have any questions; 610-666-8998 or markets_hotline@pjm.com

Sent: Thursday, 05.02.2011 5:47 p.m.
Subject: The following PJM Manuals have been revised and posted to the PJM Website

Manual 37: Reliability Coordination

Revision 07 (06/01/2011):

Annual Review Removed OVEC from PJM RC footprint.
Added the CLVLND Reactive Transfer Interface within table in Section 3.1 SOL and IROL Limit Determination.
Updated Attachment A: PJM RTO Reliability Plan.
Updated the IROL definition in section 3.1 to match the NERC Glossary of Terms.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m37.ashx

Redline Version: http://www.pjm.com/~/media/documents/manuals/m37-redline.ashx

Chris Pilong (pilonc@pjm.com) is the contact for this manual.

Manual 28: Operating Agreement Accounting

Revision 48 (06/01/2011):

Updates to reflect integration of ATSI zone.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m28.ashx

Redline Version: http://www.pjm.com/~/media/documents/manuals/m28-redline.ashx

Harry Dessender (dessenhe@pjm.com) is the contact for this manual.

Sent: Thursday, 04.28.2011 4:31 p.m.
Subject: The following PJM Manuals have been revised and posted to the PJM Website.

Manual 14A: Generation and Transmission Interconnection Process
Revision 09: (04/12/2011)
Revision 09 incorporates (1) increased detail regarding Generator Power Factor Requirements, (2) a new Attachment H: Generator Reactive Deficiency Mitigation Process, and (3) a clarification to the interconnection cost allocation process.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m14a.ashx

Redline Version: http://www.pjm.com/~/media/documents/manuals/m14a-redline.ashx

Alan Elmy (elmya@pjm.com) is the contact for this manual.

Manual 18: PJM Capacity Market
Revision 11 (04/28/2011)

Revisions for ATSI integration (Sections 2.3.1, 2.3.4, 3.3.1, and Attachment B)

Sent : Wednesday, 04.27.2011 1:31 p.m.
Subject: ATSI Integration Cutover Time Shifted to 1am EPT June 1

Dear Participants,

The planned cutover time for the integration of the ATSI zone into PJM’s footprint has been shifted by one hour. The ATSI integration will now occur at 1:00am EPT on June 1, 2011 rather than midnight EPT on June 1.

This shift is being made to accommodate the different time zones used by the MISO and PJM. MISO operates on Eastern Standard Time year round, while PJM operates on Eastern Prevailing Time, resulting in PJM being an hour ahead of MISO during daylight saving time. Moving ATSI from MISO to PJM at midnight EPT as originally planned meant MISO would need to remove ATSI from their markets at May 31 23:00 EST, which MISO’s systems cannot accommodate. Therefore, the cutover is being shifted back an hour so that ATSI remains in MISO for the full MISO market day of May 31.

Details of how the resulting 23 hour PJM market day for the ATSI zone will be handled will be added to the ATSI Integration Whitepaper and distributed to participants in the near future. The whitepaper and other information related to the ATSI integration can be found on the ATSI Integration page of the PJM Website: http://www.pjm.com/markets-and-operations/market-integration/atsi.aspx

Questions related to the cutover may be directed to Frank Koza (kozaf@pjm.com or 610-666-4228).

Sent: Wednesday, 04.27.2011 11:28 a.m.
Subject: June 2011 Auction (FTR) Dates

The Bidding Period for the PJM Jun 2011 FTR Auction will open on Thursday May 12, 2011 (0:00) and will close on Monday May 16, 2011 (17:00).

The results will be posted by Monday May 23, 2011 (17:00).

All FTR Auctions are financially binding.

The FTR Monthly Auction can be accessed using eFTR and entering bids into the "JUN 2011 Auction" market.

Valid bidding periods for the "JUN 2011 Auction" are JUN, JUL, AUG, Q1, Q2, Q3 and Q4.

Please remember to include the period in all submittals.

Valid bidding nodes are located at http://www.pjm.com/markets-and-operations/ftr/auction-user-info.aspx under the Monthly FTR Auctions section.

Sent: Monday, 04.25.2011 4:48 p.m.
Subject: The following PJM Manual has been revised and posted to the PJM Website.

Manual 14B: PJM Region Transmission Planning Process
Revision 17 (4/13/2011):

Added references where appropriate to reflect the inclusion of the American Transmission Systems, Inc. (ATSI) and Cleveland Public Power (CPP).
Clarified the methodology to establish an IROL in the Planning Horizon.
Updated the short circuit methodology to include the existing process to study all BES breakers.

Clean version: http://www.pjm.com/~/media/documents/manuals/m14b.ashx

Redline version: http://www.pjm.com/~/media/documents/manuals/m14b-redline.ashx

Paul McGlynn (mcglyp@pjm.com) is the contact for this manual.

Sent: Friday, 04.22.2011 4:20 p.m.
Subject: The following PJM Manual has been revised and posted to the PJM Website.

Manual 15: Cost Development Guidelines
Revision 16 (04/06/2011): Rewrite of entire Manual 15

This revision improves readability and addresses changes as a result of FERC Order 719 (Docket Nos. ER09-1063-000 and ER09-1063-001) requirements.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m15.ashx

Redline Version: http://www.pjm.com/~/media/documents/manuals/m15-redline.ashx

Stan Williams (willis@pjm.com) is the contact for this manual.

Sent: Monday, 04.18.2011 5:27 p.m.
Subject: Estimated Final Zonal Capacity for 2011/12 Delivery Year

Dear Members,

ESTIMATES of the Final Zonal Capacity Prices and Net Load Prices are available on the PJM website, in columns S and U of the 2011/2012 Final Zonal Scaling Factor and FZCP Calculation document located at: http://www.pjm.com/markets-and-operations/rpm/~/media/markets-ops/rpm/rpm-auction-info/2011-2012-final-zonal-ucap-obligations-and-final-zonal-scaling-factors.ashx. These values are still estimates, as certified ILR has the option to withdraw without penalty until May 31, 2011; therefore, Certified ILR Obligation and associated ILR Revenues are not considered final until 6/1/2011.

The settlement quality Final Zonal Capacity Prices will be posted as soon as possible after the June 1, 2011 ILR withdrawal deadline.

In addition, an ESTIMATE of the 2011/2012 Excess ILR MW Credits assigned to each zone for the 2011/2012 Delivery Year is now available and may be accessed on the PJM website at: http://www.pjm.com/markets-and-operations/rpm/~/media/markets-ops/rpm/rpm-auction-info/2011-2012-excess-ilr-mw-and-excess-commit-mw.ashx. Please note that the values are estimates and are subject to change as certified ILR has the option to withdraw without penalty until May 31, 2011.

Any questions on these values should be directed to rpm_hotline@pjm.com.

Sent: Friday, 04.08.2011 12:55 p.m.
Subject: Updated 2014/2015 RPM BRA Planning Period Parameters

The 2014/2015 RPM Base Residual Auction (BRA) Planning Period Parameters that were posted on February 1, 2011, have been updated to reflect adjustment for the unforced capacity (UCAP) obligation of load electing to use the Fixed Resource Requirement (FRR) alternative for the 2014/2015 Delivery Year. LSEs electing the FRR alternative had until April 1, 2011, to submit their FRR Capacity Plan for 2014/2015 Deliver Year and the updated planning period parameters reflect these elections.

The updated 2014/2015 RPM BRA planning period parameters are located at http://www.pjm.com/markets-and-operations/rpm/~/media/markets-ops/rpm/rpm-auction-info/rpm-bra-planning-parameters-2014-2015.ashx.

The updated planning parameters also include the addition of Minimum Resource Requirements for the PS, PS NORTH, DPL SOUTH and PEPCO LDAs reflecting a March 2, 2011 Compliance Filing in which PJM revised the Tariff to specify that separate minimum resource requirements be established for each LDA for which a separate VRR curve is established. The updated parameters also reflect a small correction to the value of the Minimum Extended Summer Resource Requirement for the MAAC and SWMAAC LDAs and the Minimum Annual Resource Requirement for the SWMAAC LDA.

Please send any questions to RPM_Hotline@pjm.com.

Sent: Friday, 04.08.2011 11:47 a.m.
Subject: PJM.com Disruption of Service

For those affected by this morning's disruption of service to PJM.com, all systems are up and running. PJM will be extending the OASIS deadline until 12:30pm.

Sent: Thursday, 04.07.2011 8:59 a.m.
Subject: DMZ Firewal Upgrade

On Tuesday, April 12, between 6:00 p.m. and 10 p.m. EPT and on Thursday, April 14 at 9:00 p.m. , PJM will be performing maintenance on PJM’s website and online tools. There will be a 10-15 minute outage each day during these period on these systems.

Sent: Wednesday, 04.06.2011 4.27 p.m.
Subject: The following PJM Manual has been revised and posted to the PJM Website

Manual 19: Load Forecasting and Analysis
Revision 16 (04/01/2011)

Section 3: Integrated the description of the net energy forecast model into the general model description.
Revised Exhibits 2 and 3 to reflect updated economic and weather station mappings.
Attachment A: Revised load drop estimate guidelines based on Load Management Task Force proposal approved at November 2010 Markets and Reliability Committee and January 2011 Members Committee. Corresponding tariff language changes were filed with FERC under Docket ER11-2898-000.

Clean Version: http://www.pjm.com/~/media/documents/manuals/m19.ashx

Redline Version: http://www.pjm.com/~/media/documents/manuals/m19-redline.ashx

Tom Falin (falint@pjm.com) is the contact for this manual.

Sent: Tuesday, 04.05.2011 6:02 p.m.
Subject: Information for CSPs participating in 2014/2015 RPM Base Residual Auction

Curtailment Service Providers (CSPs) wishing to offer Planned Demand Resources into the upcoming 2014/2015 RPM Base Residual Auction (BRA) must provide DR plan documentation to PJM by the close of business on Monday, April 11. PJM has posted or updated several documents to assist CSPs in the completion of their Planned DR documentation:

A document describing the requirements for offering Planned DR in RPM Auctions has been updated to include reference to the three DR product types (Annual DR, Extended Summer DR, and Limited DR) and can be found at http://www.pjm.com/markets-and-operations/rpm/~/media/markets-ops/rpm/rpm-auction-info/planned-demand-resource-rpm-auction-participation-information.ashx.
A document describing the implementation of Coupled DR Offers in RPM can be found at http://www.pjm.com/markets-and-operations/rpm/~/media/markets-ops/rpm/rpm-auction-info/20110405-implementation-of-linked-dr-offers-in-rpm.ashx.

Also, PJM has scheduled a training session for the morning of Monday, April 18 intended to provide CSPs with the necessary information to participate in RPM and offer Annual DR, Extended Summer DR, and Limited DR into the 2014/2015 DY BRA. More information on this training session will be made available shortly.

Please send any questions to RPM_Hotline@pjm.com.

Sent: Wednesday, 03.30.2011 5:48 p.m.
Subject: The following PJM Manual has been revised and posted to the PJM Website

Manual 2: Transmission Service Request
Revision 11 (approved November 18, 2010, effective April 1, 2011):

Section 1: Updated for changes required by NERC MOD standard changes. Remove duplication of OASIS information already contained in the Regional Practices. Added PJM ATC Methodology Contact.
Section 2: Updated for changes required by NERC MOD standard changes.
Section 3: Updated for changes in Long term Firm Evaluation Process and Deliverability process is described in detail in Manual 14B.
Updated various hyperlinks to PJM and OASIS website due to changes in domain.

Clean version: http://www.pjm.com/~/media/documents/manuals/m02.ashx

Redline version: http://www.pjm.com/~/media/documents/manuals/m02-redline.ashx

Chris Advena (advena@pjm.com) is the contact for this manual.

Sent: Wednesday, 03.30.2011 12:10 p.m.
Subject: EE M&V Plans for 2014/2015 RPM BRA

Energy Efficiency (EE) Resource Providers wishing to participate in the upcoming 2014/2015 RPM Base Residual Auction (BRA) must submit EE Measurement & Verification (M&V) Plans to PJM by the close of business on Friday, April 1, 2011. If an EE Resource Provider offered their EE Resource in an RPM Auction for a prior Delivery Year, the EE Resource Provider is still required to submit an Updated M&V Plan to participate in the 2014/2015 RPM BRA. Initial/Updated EE M&V Plans should be submitted via email sent to RPM_Hotline@pjm.com.

PJM has posted several documents to assist EE Resource Providers in the completion of their plans:

(1) A Nominated EE Value Template that must be completed and submitted along with any submitted EE M&V Plan can be found at http://www.pjm.com/markets-and-operations/rpm/~/media/markets-ops/rpm/rpm-auction-info/nominated-ee-value-template.ashx.

(2) The details of developing an acceptable EE M&V Plan are contained in PJM Manual 18B:Energy Efficiency Measurement and Verification. An EE Initial M&V Plan Template that more concisely summarizes the minimum requirements for an Initial M&V Plan can be found at http://www.pjm.com/markets-and-operations/rpm/~/media/markets-ops/rpm/rpm-auction-info/ee-initial-mv-plan-template.ashx.

(3) An RPM Energy Efficiency FAQ document can be found at http://www.pjm.com/markets-and-operations/rpm/~/media/markets-ops/rpm/rpm-auction-info/rpm-energy-efficiency-faqs.ashx.

Please send any questions to RPM_Hotline@pjm.com.

Sent: Monday, 03.28.2011 10:56 a.m.
Subject: May 2011 Auction (FTR) Dates

The Bidding Period for the PJM May 2011 FTR Auction will open on Monday April 11, 2011 (0:00) and will close on Wednesday April 13, 2011 (17:00).

The results will be posted by Wednesday April 20, 2011 (17:00).

All FTR Auctions are financially binding.

The FTR Monthly Auction can be accessed using eFTR and entering bids into the "MAY 2011 Auction" market.

Valid bidding period for the "MAY 2010 Auction" is MAY.

Please remember to include the period in all submittals.
Valid bidding nodes are located at http://www.pjm.com/markets-and-operations/ftr/auction-user-info.aspx under the Monthly FTR Auctions section.

Sent: Monday, 03.07.2011 3:01 p.m.
Subject: LMP Network Model Update planned for 03.17.2011

A message was sent on 3/2/2011 containing a link to the LMP network model update file for March 17, 2011. The file posted was incorrect and did not include 2 buses that are being changed in the upcoming model build. The 2 buses being terminated are
Pnode ID Tx Zone Substation Voltage Equipment
32419249 AEP PIERCE 23 KV BK6_D
32419253 AEP PIERCE 23 KV BK6_A

And are replaced with
Pnode ID Tx Zone Substation Voltage Equipment
AEP BECKJORD 24 KV BK6_D
AEP BECKJORD 24 KV BK6_A

These are the only changes to the initial file that was posted. No other changes were made.

The correct file is now posted and the incorrect file has been removed. The corrected network model updates were posted on March 7, 2011 and can be found at the following link:
http://www.pjm.com/markets-and-operations/energy/lmp-model-info/bus-model-updates.aspx

If there are any questions, please call the markets hotline at 610-666-8998 or send an email to markets_hotline@pjm.com

Sent: Monday, 03.07.2011 1:43 p.m.
Subject: Spring Daylight Savings Time Notification

This is a reminder that Daylight Savings Time will be occurring Sunday, March 13th at 2:00 AM.
Information regarding the 2011 Spring Daylight Savings Transition for the PJM eMKT application can be found at:

http://www.pjm.com/markets-and-operations/etools/emkt.aspx

If you have any questions, please call the PJM Markets Hotline at 610-666-8998

Sent: Monday, 03.07.2011 12:22 p.m.
Subject: LMP Reposting for March 4, 2011 through March 6,2011

For all hours on the days of March 4, 2011 through March 6, 2011, PJM posted incorrect real-time LMPs for the BSPEAKER13.8 KV 1, PnodeID 76427793. This is the only pnode that was posted incorrectly for the aforementioned days. As a result, PJM has corrected this error and posted updated real-time CSV files for those days titled, “yyyymmdd_updated.csv” in addition to maintaining the postings of the original files.

Per Tariff requirements, this email is intended to serve as notification of the error PJM discovered, PJM’s intent to repost and the reposting itself. The corrected and original CSV files are available and can be found at the link below.

http://pjm.com/markets-and-operations/energy/real-time/lmp.aspx

We apologize for any inconvenience.

If you have any questions, please contact the PJM Markets Hotline at 610-666-8998 or markets_hotline@pjm.com.

Sent: Monday, 02.28.2011 11:00 a.m.
Subject: Annual 2011/2012 ARR Allocation & Annual FTR Auction

Annual 2011/2012 ARR Allocation
The 2011/2012 Annual ARR Allocation and Annual FTR Auction schedule is located at http://www.pjm.com/markets-and-operations/ftr/~/media/markets-ops/ftr/ftr-allocation/ftr-market-schedule/2011-ftr-arr-market-schedule.ashx

IARRs for RTEP Upgrades
Incremental ARRs (IARRs) are allocated to network service customers and merchant transmission facility owners that are assigned cost responsibility for RTEP upgrades that meet certain criterion. This process and the IARRs that are being allocated for the 2011/2012 period are described in the document located at http://www.pjm.com/markets-and-operations/ftr/~/media/markets-ops/ftr/annual-arr-allocation/2011-2012/iarrs-for-rtep-upgrades-allocated-for-2011-12-planning-period.ashx

It is important to note that these IARRs are allocated to each network service customer and merchant transmission facility owner unless the customer elects to decline the allocation. The election to decline the allocated IARR must be made via eFTR during the Stage 1A nomination period.

Network Service Related ARR Requests
The Stage 1A ARR Nomination window opens for all LSEs at 0100 on Wednesday March 2, 2011 and closes at 1700 on Thursday, March 3, 2011. All LSEs must use the eFTR system for making their ARR requests for the 2011/2012 Planning Period. Valid Stage 1 ARR source points for each zone are located at http://www.pjm.com/markets-and-operations/ftr/~/media/markets-ops/ftr/annual-arr-allocation/2011-2012/2011-2012-historic-stage-1-resources-by-zone.ashx

Firm Point-to-Point Service Related Requests
To qualify for the Annual Allocation, requests must be associated with confirmed firm point-to-point service that spans the entire 2011/2012 Planning Period, either by its term or by renewal. To request ARRs associated with Firm Point-to-Point Service, Customers must complete the ARR/FTR Request Form located at http://www.pjm.com/markets-and-operations/ftr/~/media/markets-ops/ftr/annual-arr-allocation/2011-2012/arr-ftr-nom-spdsht-firm-p2p-2011-12.ashx

The reservations listed on the 'Qualifying Stage 1 Reservations' tab of the spreadsheet are eligible to request ARRs in Stage 1A and 1B. All other long-term reservations are eligible to request in Stage 2. Requests associated with through and out Firm point-to-point service to serve load in MISO for which there is no PJM charge must specify an associated MISO OASIS reservation number(s) for firm point-to-point or network service used to serve the load in MISO. Please return completed forms to Tim Horger (horget@pjm.com), Zhenyu Fan (fanz@pjm.com), and Kevin Bazar (bazark@pjm.com) by the close of business on Thursday, March 3, 2011, for Stage 1 requests and Monday, March 14, 2011 for Stage 2 requests.

Annual 2011/2012 FTR Auction Credit Requirements
Participants of the Annual FTR Auction must establish an Auction Credit Limit prior to bidding into the Annual FTR Auction. Credit Requests should be made to PJM's Treasury Department by April 1, 2011 for the 2011/2012 Annual FTR Auction. A summary of the FTR Auction Credit rules including examples of the credit calculation is located at http://www.pjm.com/markets-and-operations/ftr/~/media/markets-ops/ftr/ftr-allocation/ftr-credit-example-2008-2009.ashx A credit calculator that FTR auction participants can use to determine the credit requirement associated with anticipated bids is located at http://www.pjm.com/markets-and-operations/ftr/auction-user-info.aspx#FTRcredit

Sent: Friday, 02.25.2011 3:22 p.m.
Subject: April 2011 Auction (FTR) Dates

The Bidding Period for the PJM April 2011 FTR Auction will open on Friday March 11, 2011 (0:00) and will close on Tuesday March 15, 2011 (17:00).

The results will be posted by Tuesday March 22, 2011 (17:00).

All FTR Auctions are financially binding.

The FTR Monthly Auction can be accessed using eFTR and entering bids into the "APR 2011 Auction" market.

Valid bidding periods for the "APR 2010 Auction" are APR and MAY.

Please remember to include the period in all submittals.

Valid bidding nodes are located at http://www.pjm.com/markets-and-operations/ftr/auction-user-info.aspx under the Monthly FTR Auctions section.

Sent: Thursday, 02.24.2011 3:18 p.m.
Subject: Scheduled eMKT Changes

The following changes are targeted for production release on March 17th, 2011 at 7PM EST:

In the Market Results =>SRREG Award page, two new columns will be added – “TPS Result”, and “Reg Offer Price Used”. These two new columns will be populated hourly for all DSR resources participating in the Regulation Market. The “TPS Result” column will display a Pass or Fail from the Regulation TPS test score for the hour. The “Reg Offer Price Used” will display which of the price or cost based regulation offers is used which is dependent upon whether the DSR passed or failed the hourly Regulation TPS test.

These changes are already released in the eMKT sandbox - https://esuitetrain.pjm.com/mui/ .

For more information about Regulation TPS, please see section 3 of manual 11 (Energy & Ancillary Services Market Operations).

Please refer to the “External Interface Specification Guide for eMKT – Rev 19 (effective 02.24.2011)” and “eMKT XML Schema (XSD)” located at the link below for any XML changes.
Please feel free to send email to Markets Hotline at markets_hotline@pjm.com or call 610-666-8980 for any additional questions

http://www.pjm.com/markets-and-operations/etools/emkt.aspx

Sent: Monday, 02.14.2011 9:47 a.m.
Subject: Annual 2011/2012 ARR Allocation & Annual FTRAuction

This email contains important information pertaining to the upcoming annual ARR allocation and FTR auction for the 2011/2012 planning period. Please note that for the process regarding the allocation of Incremental ARRs for RTEP upgrades that action is required on the part of any network service customer or merchant transmission facility owner who elects to decline the allocated IARRs

Annual 2011/2012 ARR Allocation
The 2011/2012 Annual ARR Allocation and Annual FTR Auction schedule is located at http://www.pjm.com/markets-and-operations/ftr/~/media/markets-ops/ftr/ftr-allocation/ftr-market-schedule/2011-ftr-arr-market-schedule.ashx

IARRs for RTEP Upgrades
Incremental ARRs (IARRs) are allocated to network service customers and merchant transmission facility owners that are assigned cost responsibility for RTEP upgrades that meet certain criterion. This process and the IARRs that are being allocated for the 2011/2012 period are described in the document located at http://www.pjm.com/markets-and-operations/ftr/~/media/markets-ops/ftr/annual-arr-allocation/2011-2012/iarrs-for-rtep-upgrades-allocated-for-2011-12-planning-period.ashx

It is important to note that these IARRs are allocated to each network service customer and merchant transmission facility owner unless the customer elects to decline the allocation. The election to decline the allocated IARR must be made via eFTR during the Stage 1A nomination period.

Network Service Related ARR Requests
The Stage 1A ARR Nomination window opens for all LSEs at 0100 on Wednesday March 2, 2011 and closes at 1700 on Thursday, March 3, 2011. All LSEs must use the eFTR system for making their ARR requests for the 2011/2012 Planning Period. Valid Stage 1 ARR source points for each zone are located at http://www.pjm.com/markets-and-operations/ftr/~/media/markets-ops/ftr/annual-arr-allocation/2011-2012/2011-2012-historic-stage-1-resources-by-zone.ashx

Firm Point-to-Point Service Related Requests
To qualify for the Annual Allocation, requests must be associated with confirmed firm point-to-point service that spans the entire 2011/2012 Planning Period, either by its term or by renewal. To request ARRs associated with Firm Point-to-Point Service, Customers must complete the ARR/FTR Request Form located at http://www.pjm.com/markets-and-operations/ftr/~/media/markets-ops/ftr/annual-arr-allocation/2011-2012/arr-ftr-nom-spdsht-firm-p2p-2011-12.ashx

The reservations listed on the 'Qualifying Stage 1 Reservations' tab of the spreadsheet are eligible to request ARRs in Stage 1A and 1B. All other long-term reservations are eligible to request in Stage 2. Requests associated with through and out Firm point-to-point service to serve load in MISO for which there is no PJM charge must specify an associated MISO OASIS reservation number(s) for firm point-to-point or network service used to serve the load in MISO. Please return completed forms to Tim Horger (horget@pjm.com), Zhenyu Fan (fanz@pjm.com), and Kevin Bazar (bazark@pjm.com) by the close of business on Thursday, March 3, 2011, for Stage 1 requests and Monday, March 14, 2011 for Stage 2 requests.

Annual 2011/2012 FTR Auction Credit Requirements
Participants of the Annual FTR Auction must establish an Auction Credit Limit prior to bidding into the Annual FTR Auction. Credit Requests should be made to PJM's Treasury Department by April 1, 2011 for the 2011/2012 Annual FTR Auction. A summary of the FTR Auction Credit rules including examples of the credit calculation is located at http://www.pjm.com/markets-and-operations/ftr/~/media/markets-ops/ftr/ftr-allocation/ftr-credit-example-2008-2009.ashx A credit calculator that FTR auction participants can use to determine the credit requirement associated with anticipated bids is located at http://www.pjm.com/markets-and-operations/ftr/auction-user-info.aspx#FTRcredit

Sent: 02.03.2011 2:47 p.m.
Subject: ATSI Real-Time Market Trials

PJM has begun posting hourly Real Time LMPs for the new ATSI zone starting with the market day of February 2, 2011. The purpose of these Real Time market trials is to provide all participants the opportunity to view the generated Real Time LMPs for the ATSI zone prior to implementation. PJM will continue posting results for a couple days per week on the PJM website under the Market Integration page where participants will be able to download the market trial hourly Real Time LMPs. The files will only contain hourly Real Time LMP values for all pricing points in the new control area. The market trial hourly Real Time LMPs can be found by accessing the following link:

http://www.pjm.com/markets-and-operations/energy/lmp-model-info/atsi-real-time-market-trials.aspx

If there are any questions please contact the PJM Markets Hotline at markets_hotline@pjm.com.

Sent: 02.02.2011 9:08 a.m.
Subject: New RPM Postings Available

Good morning,

A number of new RPM-Related Postings were made available yesterday on the RPM Auction User Information Page: http://www.pjm.com/markets-and-operations/rpm/rpm-auction-user-info.aspx. They include:

Under the 2014/2015 Heading:

2014/2015 RPM BRA Planning Parameters
Please note an incorrect version was momentarily posted last night. Please make sure to use version 5 (cell H1 should read: 626190v5)
2014/2015 RPM BRA Planning Parameters Report
2014/2015 RPM Resource Model
2014/2015 Preliminary Market Structure Screen

Under the 2011/2012 Heading:

2011/2012 Final Zonal Scaling Factors & FZCP
Estimated Final Zonal Capacity Prices will be published in mid-April, after the ILR Certification Deadline.
2011/2012 Excess ILR MW Credits & Excess Commitment Credits
Excess ILR MW values and the resulting LSE allocations will not be available until June 1, 2010.
2011/2012 DUQ Daily FRR UCAP Obligation
2011/2012 ATSI Final Daily UCAP Obligation
DUKE Zone FRR UCAP Obligations for Integration

Please direct any questions related to the postings to the RPM Hotline at: rpm_hotline@pjm.com

Sent: 01.28.2011 11:52 a.m.
Subject: Two Helpful New PJM.com Features Launched

Dear Members:

In response to your feedback, PJM has launched two new features on pjm.com to make it easier for you to find and understand important information.

The new live chat feature is available on the Search Results page as a way for you to chat with a PJM representative who can help you to find the information you need in real time. The live chat button will be activated after you initiate a website search, and the Search Results page appears with the results of your search. If you are not able to locate the information you need in the Search Results, you can connect to a hotline representative for real-time assistance by selecting the live chat button embedded on the Search Results page. The live chat feature is available 8 a.m. to 5 p.m., Monday through Friday.

PJM also has launched a Data Assistant page on pjm.com to assist you in finding the information you need, particularly if you are not familiar with pjm.com or you’re not sure what search criteria to use. On this page you will find descriptive information about PJM data, postings and tools presented in easy-to-follow categories.

If you have any questions, please contact Member Relations at 610-666-8980 or toll free at 866-400-8980.

The Bidding Period for the PJM March 2011 FTR Auction will open on Friday February 11, 2011 (0:00) and will close on Tuesday February 15, 2011 (17:00).

The results will be posted by Wednesday February 23, 2011 (17:00).

All FTR Auctions are financially binding.

The FTR Monthly Auction can be accessed using eFTR and entering bids into the "MAR 2011 Auction" market.

Valid bidding periods for the "MAR 2010 Auction" are MAR, APR, MAY and Q4.

Please remember to include the period in all submittals.

Valid bidding nodes are located at http://www.pjm.com/markets-and-operations/ftr/auction-user-info.aspx under the Monthly FTR Auctions section.

Sent: 01.24.2011 4:36 p.m.
Subject: The following PJM Manual has been revised and posted to the PJM Website.

Manual 3A: Energy Management System Model Updates and Quality Assurance
Revision 06 (01/24/2011):
• Section 2.2 was expanded to include the physical location of substation equipment, including state and GPS coordinates.
• The Electrical Models section of Appendix C ‘Bulk Electric System (BES) Implementation at PJM’ was modified to discuss modeling and monitoring very low impedance equipment.
• Appendix A, TERM processing ratings data information concerning processing of temporary ratings changes was expande.

Clean version: http://www.pjm.com/~/media/documents/manuals/m03a.ashx

Redline version: http://www.pjm.com/~/media/documents/manuals/m03a-redline.ashx

Dave Schweizer (schwed@pjm.com) is the contact for this manual.

Sent: 01.21.2011 2:39 p.m.
Subject: The following PJM Manuals have been revised and posted to the PJM Website.

Manual 01: Control Center Requirements
Revision 18 (01.24.2011):
• Added reference to Manual 40 in section 2.6
• Revision to 2.7 – changed 2 hours to 1 hour (EOP-008)
• Revisions to 4.2.4 for 3 part communications

http://www.pjm.com/~/media/documents/manuals/m01.ashx

Manual 13: Emergency Operations
Revision 42 (01/24/2011):
• Section 2.2 – updated 2011 DASR % to 7.11%

http://www.pjm.com/~/media/documents/manuals/m13.ashx

Mike Bryson (brysonm@pjm.com) is the contact for these manuals.

Sent: 01.21.2011 8:03 a.m.
Subject: Communication to Members re 2014/2015 BRA Deadlines

Dear Members,

Please see the posted communication that summarizes the activities and deadlines for planned resource participation in the 2014/2015 Delivery Year Base Residual Auction and the activities and deadlines associated with a merchant transmission facility or customer-funded upgrade requesting Incremental Capacity Transfer Rights effective with the 2014/2015 Delivery Year available at http://www.pjm.com/markets-and-operations/rpm/~/media/markets-ops/rpm/rpm-auction-info/communication-to-members-re-14-15-dt-bra-deadlines.ashx.

Any questions regarding this communication should also be directed to rpm_hotline@pjm.com.

Sent: 01.21.2011 8:04 a.m.
Subject: RPM 3rd Incremental Auction Opens on Monday, February 28

Dear Members,

The 2011/2012 Delivery Year (DY) Third Incremental Auction bidding window opens at 12:01 AM EPT on Monday, February 28, 2011 and closes at 5:00 PM EPT on Friday, March 4, 2011. The 2011/2012 DY Third incremental Auction provides an opportunity for market participants to procure replacement capacity for the 2011/2012 DY.

If you desire to use a resource with a positive available MW value to cover a resource with a negative available MW value in the same portfolio, a replacement capacity transaction for the 2011/2012 DY must be submitted by 11:59 PM EPT on Sunday 2/27/2011 or you will be expected to offer the resource with the positive available capacity into the 2011/2012 DY Third Incremental Auction.

If you have procured Locational UCAP for the 2011/2012 DY through a Locational UCAP transaction, you must use the available Locational UCAP in a replacement capacity transaction for the 2011/2012 DY by 11:59 PM EPT on Sunday 2/27/2011. If the Buyer of the Locational UCAP fails to enter into a replacement transaction prior to the opening of the 2011/2012 DY Third Incremental Auction, the Locational UCAP Transaction will be denied by PJM and the Seller of the Locational UCAP will be expected to offer any resulting available capacity into the 2011/2012 DY Third Incremental Auction.

Please note if you committed capacity in the 2011/2012 FRR ATSI Integration Auction, buy bids cleared in an RPM Incremental Auction cannot directly replace your commitment. However, suppliers that cleared capacity in either the 2011/2012 Base Residual Auction or First Incremental Auction may purchase additional UCAP in the 2011/2012 RPM Third Incremental Auction to use as replacement capacity to reduce the RPM commitment on a resource, resulting in newly available capacity on such resource. They may then use the newly available capacity to transfer unit specific capacity to the ATSI Utilities for use in their FRR Capacity Plan.

In addition, please note the upcoming deadlines for Energy Efficiency Resources and Planned Demand Resources participation in the 2011/2012 Third Incremental Auction. Providers of Energy Efficiency Resources must submit Initial/Updated Measurement and Verification (M&V) Plan by January 28, 2011. The requirements for an Initial/Updated M&V Plan are available in Manual 18B: Energy Efficiency Measurement and Verification. Providers of all Planned Demand Resources (Direct Load Control, Firm Service Level, or Guaranteed Load Drop implementations) must provide DR Plan documentation by February 7, 2011. Information to be included in the DR Plan documentation is outlined in http://www.pjm.com/markets-and-operations/rpm/~/media/markets-ops/rpm/rpm-auction-info/planned-demand-resource-rpm-auction-participation-information.ashx

Frequently Asked Questions (FAQs) related to RPM Incremental Auctions are available at http://www.pjm.com/markets-and-operations/rpm/~/media/markets-ops/rpm/rpm-auction-info/rpm-incremental-auction-faqs.ashx

If your RPM Incremental Auction question is not addressed in the FAQ document, please contact the RPM Hotline at rpm_hotline@pjm.com for assistance.

2011 | 2010 | 2009

CONTACT INFORMATION

Need help finding information? Send us a question.

For additional information, please contact
Member Relations at (610) 666-8980 or
toll free at (866) 400-8980.

Website Feedback